CFR

SUBPART BBBB—Emission Guidelines and Compliance Times for Small Municipal Waste Combustion Units Constructed on or Before August 30, 1999 (§60.1500 to §60.1940)

• 60.1500—What is the purpose of this subpart?
• 60.1505—Am I affected by this subpart?
• 60.1510—Is a State plan required for all States?
• 60.1515—What must I include in my State plan?
• 60.1520—Is there an approval process for my State plan?
• 60.1525—What if my State plan is not approvable?
• 60.1530—Is there an approval process for a negative declaration letter?
• 60.1535—What compliance schedule must I include in my State plan?
• 60.1540—Are there any State plan requirements for this subpart that supersede the requirements specified in subpart B?
• 60.1545—Does this subpart directly affect municipal waste combustion unit owners and operators in my State?
• 60.1550—What municipal waste combustion units must I address in my State plan?
• 60.1555—Are any small municipal waste combustion units exempt from my State plan?
• 60.1560—Can an affected municipal waste combustion unit reduce its capacity to less than 35 tons per day rather than comply with my State plan?
• 60.1565—What subcategories of small municipal waste combustion units must I include in my State plan?
• 60.1570—What is the “model rule” in this subpart?
• 60.1575—How does the model rule relate to the required elements of my State plan?
• 60.1580—What are the principal components of the model rule?
• 60.1585—What are my requirements for meeting increments of progress and achieving final compliance?
• 60.1590—When must I complete each increment of progress?
• 60.1595—What must I include in the notifications of achievement of my increments of progress?
• 60.1600—When must I submit the notifications of achievement of increments of progress?
• 60.1605—What if I do not meet an increment of progress?
• 60.1610—How do I comply with the increment of progress for submittal of a control plan?
• 60.1615—How do I comply with the increment of progress for awarding contracts?
• 60.1620—How do I comply with the increment of progress for initiating onsite construction?
• 60.1625—How do I comply with the increment of progress for completing onsite construction?
• 60.1630—How do I comply with the increment of progress for achieving final compliance?
• 60.1635—What must I do if I close my municipal waste combustion unit and then restart my municipal waste combustion unit?
• 60.1640—What must I do if I plan to permanently close my municipal waste combustion unit and not restart it?
• 60.1645—What types of training must I do?
• 60.1650—Who must complete the operator training course? By when?
• 60.1655—Who must complete the plant-specific training course?
• 60.1660—What plant-specific training must I provide?
• 60.1665—What information must I include in the plant-specific operating manual?
• 60.1670—Where must I keep the plant-specific operating manual?
• 60.1675—What types of operator certification must the chief facility operator and shift supervisor obtain and by when must they obtain it?
• 60.1680—After the required date for operator certification, who may operate the municipal waste combustion unit?
• 60.1685—What if all the certified operators must be temporarily offsite?
• 60.1690—What are the operating practice requirements for my municipal waste combustion unit?
• 60.1695—What happens to the operating requirements during periods of startup, shutdown, and malfunction?
• 60.1700—What pollutants are regulated by this subpart?
• 60.1705—What emission limits must I meet? By when?
• 60.1710—What happens to the emission limits during periods of startup, shutdown, and malfunction?
• 60.1715—What types of continuous emission monitoring must I perform?
• 60.1720—What continuous emission monitoring systems must I install for gaseous pollutants?
• 60.1725—How are the data from the continuous emission monitoring systems used?
• 60.1730—How do I make sure my continuous emission monitoring systems are operating correctly?
• 60.1735—Am I exempt from any appendix B or appendix F requirements to evaluate continuous emission monitoring systems?
• 60.1740—What is my schedule for evaluating continuous emission monitoring systems?
• 60.1745—What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?
• 60.1750—What is the minimum amount of monitoring data I must collect with my continuous emission monitoring systems and is the data collection requirement enforceable?
• 60.1755—How do I convert my 1-hour arithmetic averages into appropriate averaging times and units?
• 60.1760—What is required for my continuous opacity monitoring system and how are the data used?
• 60.1765—What additional requirements must I meet for the operation of my continuous emission monitoring systems and continuous opacity monitoring system?
• 60.1770—What must I do if any of my continuous emission monitoring systems are temporarily unavailable to meet the data collection requirements?
• 60.1775—What types of stack tests must I conduct?
• 60.1780—How are the stack test data used?
• 60.1785—What schedule must I follow for the stack testing?
• 60.1790—What test methods must I use to stack test?
• 60.1795—May I conduct stack testing less often?
• 60.1800—May I deviate from the 13-month testing schedule if unforeseen circumstances arise?
• 60.1805—Must I meet other requirements for continuous monitoring?
• 60.1810—How do I monitor the load of my municipal waste combustion unit?
• 60.1815—How do I monitor the temperature of flue gases at the inlet of my particulate matter control device?
• 60.1820—How do I monitor the injection rate of activated carbon?
• 60.1825—What is the minimum amount of monitoring data I must collect with my continuous parameter monitoring systems and is the data collection requirement enforceable?
• 60.1830—What records must I keep?
• 60.1835—Where must I keep my records and for how long?
• 60.1840—What records must I keep for operator training and certification?
• 60.1845—What records must I keep for stack tests?
• 60.1850—What records must I keep for continuously monitored pollutants or parameters?
• 60.1855—What records must I keep for municipal waste combustion units that use activated carbon?
• 60.1860—What reports must I submit and in what form?
• 60.1865—What are the appropriate units of measurement for reporting my data?
• 60.1870—When must I submit the initial report?
• 60.1875—What must I include in my initial report?
• 60.1880—When must I submit the annual report?
• 60.1885—What must I include in my annual report?
• 60.1890—What must I do if I am out of compliance with the requirements of this subpart?
• 60.1895—If a semiannual report is required, when must I submit it?
• 60.1900—What must I include in the semiannual out-of-compliance reports?
• 60.1905—Can reporting dates be changed?
• 60.1910—What is an air curtain incinerator?
• 60.1915—What is yard waste?
• 60.1920—What are the emission limits for air curtain incinerators that burn 100 percent yard waste?
• 60.1925—How must I monitor opacity for air curtain incinerators that burn 100 percent yard waste?
• 60.1930—What are the recordkeeping and reporting requirements for air curtain incinerators that burn 100 percent yard waste?
• 60.1935—What equations must I use?
• 60.1940—What definitions must I know?

Tips