176.200—Defoaming agents used in coatings.

The defoaming agents described in this section may be safely used as components of articles intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food, subject to the provisions of this section.

(a) The defoaming agents are prepared as mixtures of substances described in paragraph (d) of this section.

(b) The quantity of any substance employed in the formulation of defoaming agents does not exceed the amount reasonably required to accomplish the intended physical or technical effect in the defoaming agents or any limitation further provided.

(c) Any substance employed in the production of defoaming agents and which is the subject of a regulation in parts 174, 175, 176, 177, 178 and § 179.45 of this chapter conforms with any specification in such regulation.

(d) Substances employed in the formulation of defoaming agents include:

(1) Substances generally recognized as safe in food.

(2) Substances subject to prior sanction or approval for use in defoaming agents and used in accordance with such sanction or approval.

(3) Substances identified in this paragraph (d)(3) and subject to such limitations as are provided:

List of substances	Limitations
n-Butyl alcohol
tert-Butyl alcohol
Butyl stearate
Castor oil, sulfated, ammonium, potassium, or sodium salt
Cetyl alcohol
Cyclohexane
Cyclohexanol
Diethylene glycol monolaurate
Diethylene glycol monostearate
Dimers and trimers of unsaturated C18 fatty acids derived from:	For use only at levels not to exceed 0.1% by weight of total coating solids.
Animal and vegetable fats and oils.
Tall oil.
Dimethylpolysiloxane
α-(Dinonylphenyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl), containing 7 to 24 moles of ethylene oxide per mole of dinonylphenol (CAS Reg. No. 9014-93-1)	For use only in defoaming agents for the production of styrene-butadiene coatings at a level not to exceed 0.05 percent by weight of the finished coating.
Dipropylene glycol
Ethyl alcohol
Fats and oils derived from animal, marine, or vegetable sources:
Fatty acids derived from animal, marine, or vegetable fats and oils, and salts of such acids, single or mixed, as follows:
Aluminum.
Ammonium.
Calcium.
Magnesium.
Potassium.
Sodium.
Zinc.
Formaldehyde	For use as preservative of defoamer only.
Glyceryl mono-12-hydroxystearate
Glyceryl monostearate
Hexane
Hexylene glycol (2-methyl-2,4-pentanediol)
Isobutyl alcohol
Isopropyl alcohol
Kerosene
Lecithin hydroxylated
Methyl alcohol
Methylcellulose
Methyl esters of fatty acids derived from animal, marine, or vegetable fats and oils
Methyl oleate
Methyl palmitate
Mineral oil
Mustardseed oil, sulfated, ammonium, potassium, or sodium salt
Myristyl alcohol
Naphtha
β-Naphthol	For use as preservative of defoamer only.
Nonylphenol
Odorless light petroleum hydrocarbons	As defined in § 178.3650 of this chapter.
Oleic acid, sulfated, ammonium, potassium, or sodium salt
Parachlorometacresol	For use as preservative of defoamer only.
Peanut oil, sulfated, ammonium, potassium, or sodium salt
Petrolatum
Pine oil
Polyacrylic acid, sodium salt	As a stabilizer and thickener in defoaming agents containing dimethylpolysiloxane.
Polyethylene
Polyethylene, oxidized
Code of Federal Regulations 232
Polyethylene glycol (200) dilaurate
Polyethylene glycol (400) dioleate
Polyethylene glycol (600) dioleate
Polyethylene glycol (400) esters of coconut oil fatty acids
Polyethylene glycol (400) monooleate
Polyethylene glycol (600) monooleate
Polyethylene glycol (600) monoricinoleate
Polyethylene glycol (400) monostearate
Polyoxybutylene-polyoxypropylene-polyoxyethylene glycol (min. mol. wt. 3,700)
Polyoxyethylated (min. 3 mols) cetyl alcohol
Polyoxyethylated (min. 5 mols) oleyl alcohol
Polyoxyethylated (min. 1.5 mols) tridecyl alcohol
Polyoxyethylene (min. 15 mols) ester of rosin
Polyoxyethylene (min. 8 mols) monooleate
Polyoxyethylene (40) stearate
Polyoxypropylated (min. 20 mols) butyl alcohol
Polyoxypropylene glycol (min. mol. wt. 200)
Polyoxypropylene (min. 20 mols) oleate butyl ether
Polyoxypropylene-polyoxyethylene glycol (min. mol. wt. 1,900)
Polyoxypropylene (min. 40 mols) stearate butyl ether
Potassium pentachlorophenate	For use as preservative of defoamer only.
Potassium trichlorophenate	Do.
Propylene glycol monoester of soybean oil fatty acids
Propylene glycol monoester of tallow fatty acids
Ricebran oil, sulfated, ammonium, potassium, or sodium salt
Rosins and rosin derivatives	As provided in § 178.3870 of this chapter.
Silica
Sodium 2-mercaptobenzothiazole	For use as preservative of defoamer only.
Sodium pentachlorophenate	Do.
Sodium trichlorophenate	Do.
Sperm oil, sulfated, ammonium, potassium, or sodium salt
Stearyl alcohol
Tall oil fatty acids
Tallow fatty acids, hydrogenated or sulfated
Tallow, sulfated, ammonium, potassium, or sodium salt
Triethanolamine
Triisopropanolamine
Waxes, petroleum

(e) The defoaming agents are used as follows:

(1) The quantity of defoaming agent or agents used shall not exceed the amount reasonably required to accomplish the intended effect, which is to prevent or control the formation of foam.

(2) The defoaming agents are used in the preparation and application of coatings for paper and paperboard.

Code of Federal Regulations

[42 FR 14554, Mar. 15, 1977, as amended at 62 FR 39772, July 24, 1997]

CFR

176.200—Defoaming agents used in coatings.

Code of Federal Regulations