American Association of Textile Chemists and Colorists (AATCC), 1 Davis Dr., P.O. Box 12215, Research Triangle Park, NC 27709 |
American National Standards Institute (ANSI), 1700 North Moore St., Suite 1540, Arlington, VA 22209-1903 |
American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959 |
General Services Administration (GSA), Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402 |
Illuminating Engineering Society of North America (IES), 120 Wall St., 7th Floor, New York, NY 10005 |
Department of Defense, DODSSP Standardization Document Order Desk, 700 Robbins Ave., Philadelphia, PA 19111-5098 |
National Center for Health Statistics, Centers for Disease Control (CDC), National Division for Health Statistics, Division of Data Services, Hyattsville, MD 20782. Phone: 1-800-232-4636; Web: http://www.cdc.gov/nchs
|
“Weight, Height, and Selected Body Dimensions of Adults: United States—1960-1962,” first published as Public Health Service Publication No. 1000 Series 11-No. 8, June 1965 and republished as DHEW Publication No. (HRA) 76-1074 |
571.3 |
National Highway Traffic Safety Administration (NHTSA), Office of Vehicle Safety Standards, DOT-NHTSA, 1200 New Jersey Ave, SE., Washington, DC 20590 |
Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth Drive, Warrendale, Pennsylvania 15096. Phone: 1-724-776-4841; Web: http://www.sae.org
|
Society of Automotive Engineers (SAE) Standard J787b, revised September 1966, “Motor Vehicle Seat Belt Anchorage” |
571.3 |
Society of Automotive Engineers (SAE) Standard J826, revised May 1987, “Devices for Use in Defining and Measuring Vehicle Seating Accommodation” |
571.3; 571.210 |
Society of Automotive Engineers (SAE) Recommended Practice J1100a, revised September 1975, “Motor Vehicle Dimensions” |
571.3 |
Society of Automotive Engineers (SAE) Recommended Practice J1100, revised June 1984, “Motor Vehicle Dimensions” |
571.3; 571.210 |
Society of Automotive Engineers (SAE) Recommended Practice J1100, revised February 2001, “Motor Vehicle Dimensions” |
571.3 |
Society of Automotive Engineers (SAE) Surface Vehicle Standard J826, revised July 1995, “Devices for Use in Defining and Measuring Vehicle Seating Accommodation” |
571.10 |
United Nations, Conference Services Division, Distribution and Sales Section, Office C.115-1, Palais des Nations, CH-1211, Geneva 10, Switzerland. Copies of Regulations also are available on the ECE internet Web site: www.unece.org/trans/main/wp29/wp29regs.html
|