15.101—Equipment authorization of unintentional radiators.

(a) Except as otherwise exempted in §§ 15.23, 15.103, and 15.113, unintentional radiators shall be authorized prior to the initiation of marketing, as follows:

Type of device	Equipment authorization required
TV broadcast receiver	Verification.
FM broadcast receiver	Verification.
CB receiver	Declaration of Conformity or Certification.
Superregenerative receiver	Declaration of Conformity or Certification.
Scanning receiver	Certification.
Radar detector	Certification.
All other receivers subject to part 15	Declaration of Conformity or Certification.
TV interface device	Declaration of Conformity or Certification.
Cable system terminal device	Declaration of Conformity.
Stand-alone cable input selector switch	Verification.
Class B personal computers and peripherals	Declaration of Conformity or Certification. 1
CPU boards and internal power supplies used with Class B personal computers	Declaration of Conformity or Certification. 1
Class B personal computers assembled using authorized CPU boards or power supplies	Declaration of Conformity.
Class B external switching power supplies	Verification.
Other Class B digital devices & peripherals	Verification.
Class A digital devices, peripherals & external switching power supplies	Verification.
Access Broadband over Power Line (Access BPL)	Certification.
All other devices	Verification.

(b) Only those receivers that operate (tune) within the frequency range of 30-960 MHz, CB receivers and radar detectors are subject to the authorizations shown in paragraph (a) of this section. However, receivers indicated as being subject to Declaration of Conformity that are contained within a transceiver, the transmitter portion of which is subject to certification, shall be authorized under the verification procedure. Receivers operating above 960 MHz or below 30 MHz, except for radar detectors and CB receivers, are exempt from complying with the technical provisions of this part but are subject to § 15.5.

(1) The specific combination of CPU board, power supply and enclosure is tested together and authorized under a Declaration of Conformity or a grant of certification;

(2) The personal computer is authorized under a Declaration of Conformity or a grant of certification, and the CPU board or power supply in that computer is replaced with a CPU board or power supply that has been separately authorized under a Declaration of Conformity or a grant of certification; or

(3) The CPU board and power supply used in the assembly of a personal computer have been separately authorized under a Declaration of Conformity or a grant of certification; and

(4) Personal computers assembled using either of the methods specified in paragraphs (c)(2) or (c)(3) of this section must, by themselves, also be authorized under a Declaration of Conformity if they are marketed. However, additional testing is not required for this Declaration of Conformity, provided the procedures in § 15.102(b) are followed.

(d) Peripheral devices, as defined in § 15.3(r), shall be authorized under a Declaration of Conformity, or a grant of certification, or verified, as appropriate, prior to marketing. Regardless of the provisions of paragraphs (a) or (c) of this section, if a CPU board, power supply, or peripheral device will always be marketed with a specific personal computer, it is not necessary to obtain a separate authorization for that product provided the specific combination of personal computer, peripheral device, CPU board and power supply has been authorized under a Declaration of Conformity or a grant of certification as a personal computer.

(1) No authorization is required for a peripheral device or a subassembly that is sold to an equipment manufacturer for further fabrication; that manufacturer is responsible for obtaining the necessary authorization prior to further marketing to a vendor or to a user.

(2) Power supplies and CPU boards that have not been separately authorized and are designed for use with personal computers may be imported and marketed only to a personal computer equipment manufacturer that has indicated, in writing, to the seller or importer that they will obtain a Declaration of Conformity or a grant of certification for the personal computer employing these components.

(e) Subassemblies to digital devices are not subject to the technical standards in this part unless they are marketed as part of a system in which case the resulting system must comply with the applicable regulations. Subassemblies include:

(1) Devices that are enclosed solely within the enclosure housing the digital device, except for: power supplies used in personal computers; devices included under the definition of a peripheral device in § 15.3(r); and personal computer CPU boards, as defined in § 15.3(bb) ;

(2) CPU boards, as defined in § 15.3(bb), other than those used in personal computers, that are marketed without an enclosure or power supply; and

(3) Switching power supplies that are separately marketed and are solely for use internal to a device other than a personal computer.

(f) The procedures for obtaining a grant of certification or notification and for verification and a Declaration of Conformity are contained in subpart J of part 2 of this chapter.

[54 FR 17714, Apr. 25, 1989, as amended at 61 FR 31050, June 19, 1996; 63 FR 36602, July 7, 1998; 64 FR 4997, Feb. 2, 1999; 67 FR 48993, July 29, 2002; 70 FR 1373, Jan. 7, 2005]

CFR

15.101—Equipment authorization of unintentional radiators.