125.180—Incorporation by reference.

(a) Certain materials are incorporated by reference into this subchapter with the approval of the Director of the Federal Register in compliance with 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other than the one listed in paragraph (b) of this section, the Coast Guard must publish notice of change in the Federal Register and the material must be available to the public. All approved materials are on file for inspection at the U.S. Coast Guard, Office of Operating and Environmental Standards, (CG-522) 2100 2nd St. SW., Stop 7126, Washington, DC 20593-7126, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. All material are available from the sources indicated in paragraph (b) of this section.

(b) The materials approved for incorporation by reference in this subchapter, and the sections affected, are as follows:

American Bureau of Shipping (ABS):
ABS Plaza, 16855 Northchase Drive, Houston, TX 77060
Rules for Building and Classing Steel Vessels Under 61 Meters (200 Ft) in Length (1983)	127.210
Rules for Building and Classing Steel Vessels (1995)	127.210; 129.360
Rules for Building and Classing Aluminum Vessels (1975)	127.210
Rules for Building and Classing Mobile Offshore Drilling Units (1994)	133.140; 133.150
American National Standards Institute (ANSI):
11 West 42nd St., New York, NY 10036
B 31.1-1986, Code for Pressure Piping, Power Piping	128.240
Z 26.1-1977 (including 1980 Supplement), Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways	127.430
American Society of Mechanical Engineers (ASME) International:
Three Park Avenue, New York, NY 10016-5990
Boiler and Pressure Vessel Code Section I, Power Boilers, July 1989 with 1989 addenda	128.240
American Society for Testing and Materials (ASTM):
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959
ASTM D 93-97, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester	128.310
American Yacht and Boat Council, Inc. (AYBC):
3069 Solomon's Island Rd., Edgewater, MD 21037-1416
A-3-1993, Galley Stoves	129.550
A-7-1970, Recommended Practices and Standards Covering Boat Heating Systems	129.550
E-1-1972, Bonding of Direct-Current Systems	129.120
E-8-1994, Alternating-Current (AC) Electrical Systems on Boats	129.120
Code of Federal Regulations 375
E-9-1990, Direct-Current (DC) Electrical Systems on Boats	129.120
Institute of Electrical and Electronics Engineers (IEEE):
IEEE Service Center, 445 Hoes Lane, Piscataway, NJ 08855
No. 45-1977, Recommended Practice for Electric Installations on Shipboard	129.340
International Maritime Organization (IMO):
Publications Section, 4 Albert Embankment, London SE1 7SR, United Kingdom
Resolution A.520(13), Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-saving Appliances and Arrangements, dated 17 November 1983	133.40
Resolution A.658(16), “Use and Fitting of Retro-Reflective Materials on Life-saving Appliances”, dated 20 November 1989	131.855; 131.875; 133.70
Resolution A.760(18), “Symbols Related to Life-Saving Appliances and Arrangements”, dated 17 November 1993	131.875; 133.70; 133.90
International Convention for the Safety of Life at Sea (SOLAS), Consolidated Edition, 1992	126.170
National Fire Protection Association (NFPA):
1 Batterymarch Park, Quincy, MA 02269-9101
NFPA 70, National Electrical Code, 1993 Edition	129.320; 129.340; 129.370
NFPA 306, Control of Gas Hazards on Vessels, 1993 Edition	126.160
NFPA 1963, Fire Hose Connections, 1993 Edition	132.130
NFPA 10, Standard for Portable Fire Extinguishers, 1994 Edition	132.350
NFPA 302—Fire Protection Standard for Pleasure and Commercial Motor Craft, 1994 Edition	129.550
Underwriters Laboratories, Inc. (UL):
12 Laboratory Drive, Research Triangle Park, NC 27709-3995
UL 19-1992, Lined Fire Hose and Hose Assemblies	132.130
UL 486A-1992, Wire Connectors and Soldering Lugs for Use with Copper Conductors	129.340
UL 489-1995, Molded-Case Circuit Breakers and Circuit-Breaker Enclosures	129.380
UL 57-1976, Electric Lighting Fixtures	129.410
UL 595-1991, Marine-Type Electric Lighting Fixtures	129.410
UL 1570-1995, Fluorescent Lighting Fixtures	129.410
UL 1571-1995, Incandescent Lighting Fixtures	129.410
UL 1572-1995, High Intensity Discharge Lighting Fixtures	129.410
UL 1573-1995, Stage and Studio Lighting Units	129.410
UL 1574-1995, Track Lighting Systems	129.410

[CGD 82-004 and CGD 86-074, 62 FR 49321, Sept. 19, 1997, as amended by CGD 97-057, 62 FR 51047, Sept. 30, 1997; 64 FR 53227, Oct. 1, 1999; USCG 1999-5151, 64 FR 67183, Dec. 1, 1999; USCG-2000-7790, 65 FR 58463, Sept. 29, 2000; USCG-2009-0702, 74 FR 49234, Sept. 25, 2009]