89.6—Reference materials.

(a) Incorporation by reference. The documents in paragraph (b) of this section have been incorporated by reference. The incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be inspected at US EPA, OAR, 1200 Pennsylvania Ave., NW., Washington, DC 20460, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.

(b) The following paragraphs and tables set forth the material that has been incorporated by reference in this part.

(1) ASTM material. The following table sets forth material from the American Society for Testing and Materials which has been incorporated by reference. The first column lists the number and name of the material. The second column lists the section(s) of this part, other than § 89.6, in which the matter is referenced. The second column is presented for information only and may not be all inclusive. Copies of these materials may be obtained from American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.

Document number and name	40 CFR part 89 reference
ASTM D86-97:
“Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure”	Appendix A to Subpart D.
ASTM D93-97:
“Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester”	Appendix A to Subpart D.
ASTM D129-95:
“Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)”	Appendix A to Subpart D.
ASTM D287-92:
“Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products” (Hydrometer Method)	Appendix A to Subpart D
ASTM D445-97:
“Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)”	Appendix A to Subpart D.
ASTM D613-95:
“Standard Test Method for Cetane Number of Diesel Fuel Oil”	Appendix A to Subpart D.
ASTM D1319-98:
“Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption”	Appendix A to Subpart D.
ASTM D2622-98:
“Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry”	Appendix A to Subpart D.
ASTM D5186-96:
“Standard Test Method for “Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Tubine Fuels By Supercritical Fluid Chromatography”	Appendix A to Subpart D.
ASTM E29-93a:
“Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications”	89.120; 89.207; 89.509.

(2) SAE material. The following table sets forth material from the Society of Automotive Engineers which has been incorporated by reference. The first column lists the number and name of the material. The second column lists the section(s) of this part, other than § 89.6, in which the matter is referenced. The second column is presented for information only and may not be all inclusive. Copies of these materials may be obtained from Society of Automotive Engineers International, 400 Commonwealth Dr., Warrendale, PA 15096-0001.

Document number and name	40 CFR part 89 reference
SAE J244 June 83:
Recommended Practice for Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines	89.416-96
Code of Federal Regulations 47
SAE J1937 November 89:
Recommended Practice for Engine Testing with Low Temperature Charge Air Cooler Systems in a Dynamometer Test Cell	89.327-96
SAE Paper 770141:
Optimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts, Glenn D. Reschke	89.319-96

(3) California Air Resources Board Test Procedure. The following table sets forth material from the Title 13, California Code of Regulations, Sections 2420-2427, as amended by California Air Resources Board Resolution 92-2 and published in California Air Resources Board mail out #93-42, September 1, 1993) which has been incorporated by reference. The first column lists the number and name of the material. The second column lists the section(s) of this part, other than § 89.6, in which the matter is referenced. The second column is presented for information only and may not be all inclusive. Copies of these materials may be obtained from California Air Resources Board, Haagen-Smit Laboratory, 9528 Telstar Avenue, El Monte, CA 91731-2990.

Document number and name	40 CFR part 89 reference
California Regulations for New 1996 and Later Heavy-Duty Off-Road Diesel Cycle Engines	89.112-9689.119-96 89.508-96

Code of Federal Regulations

[59 FR 31335, June 17, 1994, as amended at 63 FR 56997, Oct. 23, 1998]