CFR

SUBPART AAAA—Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is Commenced After August 30, 1999 or for Which Modification or Reconstruction is Commenc

• 60.1000—What does this subpart do?
• 60.1005—When does this subpart become effective?
• 60.1010—Does this subpart apply to my municipal waste combustion unit?
• 60.1015—What is a new municipal waste combustion unit?
• 60.1020—Does this subpart allow any exemptions?
• 60.1025—Do subpart E new source performance standards also apply to my municipal waste combustion unit?
• 60.1030—Can the Administrator delegate authority to enforce these Federal new source performance standards to a State agency?
• 60.1035—How are these new source performance standards structured?
• 60.1040—Do all five components of these new source performance standards apply at the same time?
• 60.1045—Are there different subcategories of small municipal waste combustion units within this subpart?
• 60.1050—Who must submit a materials separation plan?
• 60.1055—What is a materials separation plan?
• 60.1060—What steps must I complete for my materials separation plan?
• 60.1065—What must I include in my draft materials separation plan?
• 60.1070—How do I make my draft materials separation plan available to the public?
• 60.1075—When must I accept comments on the materials separation plan?
• 60.1080—Where and when must I hold a public meeting on my draft materials separation plan?
• 60.1085—What must I do with any public comments I receive during the public comment period on my draft materials separation plan?
• 60.1090—What must I do with my revised materials separation plan?
• 60.1095—What must I include in the public meeting on my revised materials separation plan?
• 60.1100—What must I do with any public comments I receive on my revised materials separation plan?
• 60.1105—How do I submit my final materials separation plan?
• 60.1110—Who must submit a siting analysis?
• 60.1115—What is a siting analysis?
• 60.1120—What steps must I complete for my siting analysis?
• 60.1125—What must I include in my siting analysis?
• 60.1130—How do I make my siting analysis available to the public?
• 60.1135—When must I accept comments on the siting analysis and revised materials separation plan?
• 60.1140—Where and when must I hold a public meeting on the siting analysis?
• 60.1145—What must I do with any public comments I receive during the public comment period on my siting analysis?
• 60.1150—How do I submit my siting analysis?
• 60.1155—What types of training must I do?
• 60.1160—Who must complete the operator training course? By when?
• 60.1165—Who must complete the plant-specific training course?
• 60.1170—What plant-specific training must I provide?
• 60.1175—What information must I include in the plant-specific operating manual?
• 60.1180—Where must I keep the plant-specific operating manual?
• 60.1185—What types of operator certification must the chief facility operator and shift supervisor obtain and by when must they obtain it?
• 60.1190—After the required date for operator certification, who may operate the municipal waste combustion unit?
• 60.1195—What if all the certified operators must be temporarily offsite?
• 60.1200—What are the operating practice requirements for my municipal waste combustion unit?
• 60.1205—What happens to the operating requirements during periods of startup, shutdown, and malfunction?
• 60.1210—What pollutants are regulated by this subpart?
• 60.1215—What emission limits must I meet? By when?
• 60.1220—What happens to the emission limits during periods of startup, shutdown, and malfunction?
• 60.1225—What types of continuous emission monitoring must I perform?
• 60.1230—What continuous emission monitoring systems must I install for gaseous pollutants?
• 60.1235—How are the data from the continuous emission monitoring systems used?
• 60.1240—How do I make sure my continuous emission monitoring systems are operating correctly?
• 60.1245—Am I exempt from any appendix B or appendix F requirements to evaluate continuous emission monitoring systems?
• 60.1250—What is my schedule for evaluating continuous emission monitoring systems?
• 60.1255—What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?
• 60.1260—What is the minimum amount of monitoring data I must collect with my continuous emission monitoring systems and is the data collection requirement enforceable?
• 60.1265—How do I convert my 1-hour arithmetic averages into the appropriate averaging times and units?
• 60.1270—What is required for my continuous opacity monitoring system and how are the data used?
• 60.1275—What additional requirements must I meet for the operation of my continuous emission monitoring systems and continuous opacity monitoring system?
• 60.1280—What must I do if any of my continuous emission monitoring systems are temporarily unavailable to meet the data collection requirements?
• 60.1285—What types of stack tests must I conduct?
• 60.1290—How are the stack test data used?
• 60.1295—What schedule must I follow for the stack testing?
• 60.1300—What test methods must I use to stack test?
• 60.1305—May I conduct stack testing less often?
• 60.1310—May I deviate from the 13-month testing schedule if unforeseen circumstances arise?
• 60.1315—Must I meet other requirements for continuous monitoring?
• 60.1320—How do I monitor the load of my municipal waste combustion unit?
• 60.1325—How do I monitor the temperature of flue gases at the inlet of my particulate matter control device?
• 60.1330—How do I monitor the injection rate of activated carbon?
• 60.1335—What is the minimum amount of monitoring data I must collect with my continuous parameter monitoring systems and is the data collection requirement enforceable?
• 60.1340—What records must I keep?
• 60.1345—Where must I keep my records and for how long?
• 60.1350—What records must I keep for the materials separation plan and siting analysis?
• 60.1355—What records must I keep for operator training and certification?
• 60.1360—What records must I keep for stack tests?
• 60.1365—What records must I keep for continuously monitored pollutants or parameters?
• 60.1370—What records must I keep for municipal waste combustion units that use activated carbon?
• 60.1375—What reports must I submit before I submit my notice of construction?
• 60.1380—What must I include in my notice of construction?
• 60.1385—What reports must I submit after I submit my notice of construction and in what form?
• 60.1390—What are the appropriate units of measurement for reporting my data?
• 60.1395—When must I submit the initial report?
• 60.1400—What must I include in my initial report?
• 60.1405—When must I submit the annual report?
• 60.1410—What must I include in my annual report?
• 60.1415—What must I do if I am out of compliance with the requirements of this subpart?
• 60.1420—If a semiannual report is required, when must I submit it?
• 60.1425—What must I include in the semiannual out-of-compliance reports?
• 60.1430—Can reporting dates be changed?
• 60.1435—What is an air curtain incinerator?
• 60.1440—What is yard waste?
• 60.1445—What are the emission limits for air curtain incinerators that burn 100 percent yard waste?
• 60.1450—How must I monitor opacity for air curtain incinerators that burn 100 percent yard waste?
• 60.1455—What are the recordkeeping and reporting requirements for air curtain incinerators that burn 100 percent yard waste?
• 60.1460—What equations must I use?
• 60.1465—What definitions must I know?

Tips