CFR
- Title 1 - General Provisions
- Title 2 - Grants and Agreements
- Title 3 - The President
- Title 4 - Accounts
- Title 5 - Administrative Personnel
- Title 6 - Domestic Security
- Title 7 - Agriculture
- Title 8 - Aliens and Nationality
- Title 9 - Animals and Animal Products
- Title 10 - Energy
- Title 11 - Federal Elections
- Title 12 - Banks and Banking
- Title 13 - Business Credit and Assistance
- Title 14 - Aeronautics and Space
- Title 15 - Commerce and Foreign Trade
- Title 16 - Commercial Practices
- Title 17 - Commodity and Securities Exchanges
- Title 18 - Conservation of Power and Water Resources
- Title 19 - Customs Duties
- Title 20 - Employees' Benefits
- Title 21 - Food and Drugs
- Title 22 - Foreign Relations
- Title 23 - Highways
- Title 24 - Housing and Urban Development
- Title 25 - Indians
- Title 26 - Internal Revenue
- Title 27 - Alcohol, Tobacco Products and Firearms
- Title 28 - Judicial Administration
- Title 29 - Labor
- Title 30 - Mineral Resources
- Title 31 - Money and Finance: Treasury
- Title 32 - National Defense
- Title 33 - Navigation and Navigable Waters
- Title 34 - Education
- Title 35 - Panama Canal
- Title 36 - Parks, Forests, and Public Property
- Title 37 - Patents, Trademarks, and Copyrights
- Title 38 - Pensions, Bonuses, and Veterans' Relief
- Title 39 - Postal Service
- Title 40 - Protection of Environment
- Title 41 - Public Contracts and Property Management
- Title 42 - Public Health
- Title 43 - Public Lands: Interior
- Title 44 - Emergency Management and Assistance
- Title 45 - Public Welfare
- Title 46 - Shipping
- Title 47 - Telecommunication
- Title 48 - Federal Acquisition Regulations System
- Title 49 - Transportation
- Title 50 - Wildlife and Fisheries
471.34—Pretreatment standards for existing sources (PSES).
Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and by August 23, 1988 achieve the following pretreatment standards for existing sources (PSES). The mass of wastewater pollutants in nickel-cobalt forming wastewater introduced into a POTW shall not exceed the following values:
(a) Rolling spent neat oils—Subpart C—PSES.
There shall be no discharge of process wastewater pollutants.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt rolled with emulsions | ||
| Chromium | 0.063 | 0.026 |
| Nickel | 0.094 | 0.063 |
| Fluoride | 10.1 | 4.49 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt rolled with water | ||
| Chromium | 0.028 | 0.011 |
| Nickel | 0.042 | 0.028 |
| Fluoride | 4.49 | 1.99 |
(1)
There shall be no discharge of process wastewater pollutants except as provided under paragraph (d)(2) of this section.
(2)
Process wastewater pollutants may be discharged, with no allowance for any pollutants discharged, provided the facility owner or operator demonstrates, on the basis of analytical methods set forth in or approved pursuant to 40 CFR part 136, that the concentrations of nitrosamine compounds in the wastewater discharged from the tube reducing process do not exceed 0.050 mg/l of N-nitrosodimethylamine, 0.020 mg/l of N-nitrosodiphenylamine, and 0.020 mg/l of N-nitrosodi-n-propylamine.
(3)
The demonstration required under paragraph (d)(2) of this section shall be made once per month until the demonstration has been made for all three nitrosamine compounds for six consecutive months, after which time the demonstration may be made once per quarter. If a sample is found to contain any of the foregoing nitrosamine compounds at concentrations greater than those specified in paragraph (d)(2) of this section, the actions described in paragraph (d)(4) of this section shall be taken, and the demonstration required under paragraph (d)(2) of this section shall be made once per month until it has been made for all three nitrosamine compounds for six consecutive months.
(4)
If sampling results show that any of the foregoing nitrosamine compounds is present in the process wastewater at concentrations greater than those specified in paragraph (d)(2) of this section, the facility owner or operator shall ensure that, within thirty days of receiving written notification of the sampling results, there is no further discharge of tube reducing spent lubricant wastewater until the owner or operator:
(i)
Performs a subsequent analysis which demonstrates that the concentrations of the foregoing nitrosamine compounds do not exceed the levels specified in paragraph (d)(2) of this section; or
(ii)
Substitutes a new tube reducing lubricant and thereafter complies with the requirements of paragraph (d)(3) of this section; or
(iii)
Determines the source of the pollutant whose concentration exceeded the level specified in paragraph (d)(2) of this section and demonstrates to the satisfaction of the POTW control authority that such source has been eliminated.
(5)
The concentration limits specified in paragraph (d)(2) of this section apply at the point of discharge from the tube reducing process. However, sampling after the tube reducing wastewater has been commingled with other wastewaters is permitted if:
(i)
Any dilution caused by the other wastewaters is taken into account in determining the appropriate (i.e., lower) allowable discharge concentration; and
(ii)
An analytical method of sufficient sensitivity is used to measure the levels of each of the foregoing nitrosamine compounds in the wastewaters being sampled.
(e) Drawing spent neat oils—Subpart C—PSES.
There shall be no discharge of process wastewater pollutants.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt drawn with emulsions | ||
| Chromium | 0.036 | 0.014 |
| Nickel | 0.053 | 0.036 |
| Fluoride | 5.68 | 2.52 |
(g) Extrusion spent lubricants—Subpart C—PSES.
There shall be no discharge of process wastewater pollutants.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of extruded nickel-cobalt heat treated | ||
| Chromium | 0.031 | 0.013 |
| Nickel | 0.046 | 0.031 |
| Fluoride | 4.95 | 2.20 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt extruded | ||
| Chromium | 0.086 | 0.034 |
| Nickel | 0.128 | 0.086 |
| Fluoride | 13.8 | 6.13 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt forged | ||
| Chromium | 0.002 | 0.0006 |
| Nickel | 0.002 | 0.002 |
| Fluoride | 0.238 | 0.106 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of forged nickel-cobalt cooled with water | ||
| Chromium | 0.018 | 0.007 |
| Nickel | 0.026 | 0.018 |
| Fluoride | 2.82 | 1.25 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt forged | ||
| Chromium | 0.069 | 0.028 |
| Nickel | 0.103 | 0.069 |
| Fluoride | 11.2 | 4.94 |
(m) Forging spent lubricants—Subpart C—PSES.
There shall be no discharge of process wastewater pollutants.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt cast with stationary methods | ||
| Chromium | 0.448 | 0.182 |
| Nickel | 0.666 | 0.448 |
| Fluoride | 72.0 | 32.0 |
(o) Vacuum melting steam condensate—Subpart C—PSES.
There shall be no allowance for the discharge of wastewater pollutants.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt metal powder atomized | ||
| Chromium | 0.970 | 0.393 |
| Nickel | 1.44 | 0.970 |
| Fluoride | 156 | 69.2 |
(q) Annealing and solution heat treatment contact cooling water—Subpart C—PSES.
There shall be no allowance for the discharge of wastewater pollutants.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt formed | ||
| Chromium | 0.300 | 0.122 |
| Nickel | 0.446 | 0.300 |
| Fluoride | 48.2 | 21.4 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt surface treated | ||
| Chromium | 0.346 | 0.141 |
| Nickel | 0.514 | 0.346 |
| Fluoride | 55.7 | 24.7 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt surface treated | ||
| Chromium | 0.873 | 0.354 |
| Nickel | 1.30 | 0.873 |
| Fluoride | 141 | 62.3 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt alkaline cleaned | ||
| Chromium | 0.013 | 0.005 |
| Nickel | 0.019 | 0.013 |
| Fluoride | 2.02 | 0.895 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt alkaline cleaned | ||
| Chromium | 0.086 | 0.035 |
| Nickel | 0.128 | 0.086 |
| Fluoride | 13.9 | 6.15 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt treated with molten salt | ||
| Chromium | 0.312 | 0.127 |
| Nickel | 0.464 | 0.312 |
| Fluoride | 50.2 | 22.3 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt treated with ammonia solution | ||
| Chromium | 0.006 | 0.002 |
| Nickel | 0.008 | 0.006 |
| Fluoride | 0.881 | 0.391 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt sawed or ground with emulsions | ||
| Chromium | 0.015 | 0.006 |
| Nickel | 0.022 | 0.015 |
| Fluoride | 2.35 | 1.04 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of sawed or ground nickel-cobalt rinsed | ||
| Chromium | 0.067 | 0.027 |
| Nickel | 0.100 | 0.067 |
| Fluoride | 10.8 | 4.78 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt steam cleaned | ||
| Chromium | 0.011 | 0.005 |
| Nickel | 0.017 | 0.011 |
| Fluoride | 1.79 | 0.795 |
(bb) Hydrostatic Tube Testing and Ultrasonic Testing Wastewater—Subpart C—PSES.
There shall be no allowance for the discharge of process wastewater pollutants.
(cc) Degreasing Spent Solvents—Subpart C—PSES.
There shall be no discharge of process wastewater pollutants.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt tested with dye penetrant method | ||
| Chromium | 0.079 | 0.032 |
| Nickel | 0.117 | 0.079 |
| Fluoride | 12.7 | 5.63 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt electrocoated | ||
| Chromium | 1.25 | 0.506 |
| Nickel | 1.86 | 1.25 |
| Fluoride | 201 | 89.0 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt formed | ||
| Chromium | 0.091 | 0.037 |
| Nickel | 0.136 | 0.091 |
| Fluoride | 14.7 | 6.50 |
Code of Federal Regulations
Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and by August 23, 1988 achieve the following pretreatment standards for existing sources (PSES). The mass of wastewater pollutants in nickel-cobalt forming wastewater introduced into a POTW shall not exceed the following values:
(a) Rolling spent neat oils—subpart C—PSES.
There shall be no discharge of process wastewater pollutants.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt rolled with emulsions | ||
| Chromium | 0.063 | 0.026 |
| Nickel | 0.094 | 0.063 |
| Fluoride | 10.1 | 4.49 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt rolled with water | ||
| Chromium | 0.028 | 0.011 |
| Nickel | 0.042 | 0.028 |
| Fluoride | 4.49 | 1.99 |
(1)
There shall be no discharge of process wastewater pollutants except as provided under paragraph (d)(2) of this section.
(2)
Process wastewater pollutants may be discharged, with no allowance for any pollutants discharged, provided the facility owner or operator demonstrates, on the basis of analytical methods set forth in or approved pursuant to 40 CFR part 136, that the concentrations of nitrosamine compounds in the wastewater discharged from the tube reducing process do not exceed 0.050 mg/l of N-nitrosodimethylamine, 0.020 mg/l of N-nitrosodiphenylamine, and 0.020 mg/l of N-nitrosodi-n-propylamine.
(3)
The demonstration required under paragraph (d)(2) of this section shall be made once per month until the demonstration has been made for all three nitrosamine compounds for six consecutive months, after which time the demonstration may be made once per quarter. If a sample is found to contain any of the foregoing nitrosamine compounds at concentrations greater than those specified in paragraph (d)(2) of this section, the actions described in paragraph (d)(4) of this section shall be taken, and the demonstration required under paragraph (d)(2) of this section shall be made once per month until it has been made for all three nitrosamine compounds for six consecutive months.
(4)
If sampling results show that any of the foregoing nitrosamine compounds is present in the process wastewater at concentrations greater than those specified in paragraph (d)(2) of this section, the facility owner or operator shall ensure that, within thirty days of receiving written notification of the sampling results, there is no further discharge of tube reducing spent lubricant wastewater until the owner or operator:
(i)
Performs a subsequent analysis which demonstrates that the concentrations of the foregoing nitrosamine compounds do not exceed the levels specified in paragraph (d)(2) of this section; or
(ii)
Substitutes a new tube reducing lubricant and thereafter complies with the requirements of paragraph (d)(3) of this section; or
(iii)
Determines the source of the pollutant whose concentration exceeded the level specified in paragraph (d)(2) of this section and demonstrates to the satisfaction of the POTW control authority that such source has been eliminated.
(5)
The concentration limits specified in paragraph (d)(2) of this section apply at the point of discharge from the tube reducing process. However, sampling after the tube reducing wastewater has been commingled with other wastewaters is permitted if:
(i)
Any dilution caused by the other wastewaters is taken into account in determining the appropriate (i.e., lower) allowable discharge concentration; and
(ii)
An analytical method of sufficient sensitivity is used to measure the levels of each of the foregoing nitrosamine compounds in the wastewaters being sampled.
(e) Drawing spent neat oils—subpart C—PSES.
There shall be no discharge of process wastewater pollutants.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt drawn with emulsions | ||
| Chromium | 0.036 | 0.014 |
| Nickel | 0.053 | 0.036 |
| Fluoride | 5.68 | 2.52 |
(g) Extrusion spent lubricants—subpart C—PSES.
There shall be no discharge of process wastewater pollutants.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of extruded nickel-cobalt heat treated | ||
| Chromium | 0.031 | 0.013 |
| Nickel | 0.046 | 0.031 |
| Fluoride | 4.95 | 2.20 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt extruded | ||
| Chromium | 0.086 | 0.034 |
| Nickel | 0.128 | 0.086 |
| Fluoride | 13.8 | 6.13 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt forged | ||
| Chromium | 0.002 | 0.0006 |
| Nickel | 0.002 | 0.002 |
| Fluoride | 0.238 | 0.106 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of forged nickel-cobalt cooled with water | ||
| Chromium | 0.018 | 0.007 |
| Nickel | 0.026 | 0.018 |
| Fluoride | 2.82 | 1.25 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt forged | ||
| Chromium | 0.069 | 0.028 |
| Nickel | 0.103 | 0.069 |
| Fluoride | 11.2 | 4.94 |
(m) Forging spent lubricants—subpart C—PSES.
There shall be no discharge of process wastewater pollutants.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt cast with stationary methods | ||
| Chromium | 0.448 | 0.182 |
| Nickel | 0.666 | 0.448 |
| Fluoride | 72.0 | 32.0 |
(o) Vacuum melting steam condensate—subpart C—PSES.
There shall be no allowance for the discharge of wastewater pollutants.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt metal powder atomized | ||
| Chromium | 0.970 | 0.393 |
| Nickel | 1.44 | 0.970 |
| Fluoride | 156 | 69.2 |
(q) Annealing and solution heat treatment contact cooling water—subpart C—PSES.
There shall be no allowance for the discharge of wastewater pollutants.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt formed | ||
| Chromium | 0.300 | 0.122 |
| Nickel | 0.446 | 0.300 |
| Fluoride | 48.2 | 21.4 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt surface treated | ||
| Chromium | 0.346 | 0.141 |
| Nickel | 0.514 | 0.346 |
| Fluoride | 55.7 | 24.7 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| mg/off-kg (pounds per million off-pounds) of nickel-cobalt surface treated | ||
| Chromium | 0.873 | 0.354 |
| Nickel | 1.30 | 0.873 |
| Fluoride | 141 | 62.3 |
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average<
Tips
|
|---|