Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and by August 23, 1988 achieve the following pretreatment standards for existing sources (PSES). The mass of wastewater pollutants in magnesium forming process wastewater introduced into a POTW shall not exceed the following values:
(a) Rolling spent emulsions.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium rolled with emulsions |
| Chromium |
0.033 |
0.014 |
| Zinc |
0.109 |
0.046 |
| Ammonia |
9.95 |
4.37 |
| Fluoride |
4.44 |
1.97 |
(b) Forging spent lubricants—Subpart B—PSE.
There shall be no discharge of process wastewater pollutants.
(c) Forging contact cooling water.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium cooled with water |
| Chromium |
0.127 |
0.052 |
| Zinc |
0.422 |
0.177 |
| Ammonia |
38.5 |
17.0 |
| Fluoride |
17.2 |
7.63 |
(d) Forging equipment cleaning wastewater.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium forged |
| Chromium |
0.002 |
0.0007 |
| Zinc |
0.006 |
0.003 |
| Ammonia |
0.532 |
0.234 |
| Fluoride |
0.238 |
0.106 |
(e) Direct chill casting contact cooling water.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium cast with direct chill methods |
| Chromiun |
1.74 |
0.711 |
| Zinc |
5.77 |
2.41 |
| Ammonia |
527 |
232 |
| Fluoride |
235 |
105 |
(f) Surface treatment spent baths.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium surface treated |
| Chromiun |
0.205 |
0.084 |
| Zinc |
0.681 |
0.285 |
| Ammonia |
62.1 |
27.3 |
| Fluoride |
27.8 |
12.3 |
(g) Surface treatment rinse.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium surface treated |
| Chromiun |
0.832 |
0.340 |
| Zinc |
2.76 |
1.16 |
| Ammonia |
252 |
111 |
| Fluoride |
113 |
49.9 |
(h) Sawing or grinding spent emulsions.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium sawed or ground |
| Chromiun |
0.009 |
0.004 |
| Zinc |
0.029 |
0.012 |
| Ammonia |
2.60 |
1.15 |
| Fluoride |
1.16 |
0.515 |
(i) Degreasing Spent Solvents—Subpart B—PSES.
There shall be no discharge of process wastewater pollutants.
(j) Wet air pollution control scrubber blowdown.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium sanded and repaired or forged |
| Chromium |
0.273 |
0.112 |
| Zinc |
0.904 |
0.378 |
| Ammonia |
8.25 |
36.3 |
| Fluoride |
36.9 |
16.4 |
Code of Federal Regulations
[50 FR 34270, Aug. 23, 1985; 51 FR 2884, Jan. 22, 1986]
Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and by August 23, 1988 achieve the following pretreatment standards for existing sources (PSES). The mass of wastewater pollutants in magnesium forming process wastewater introduced into a POTW shall not exceed the following values:
(a) Rolling spent emulsions.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium rolled with emulsions |
| Chromium |
0.033 |
0.014 |
| Zinc |
0.109 |
0.046 |
| Ammonia |
9.95 |
4.37 |
| Fluoride |
4.44 |
1.97 |
(b) Forging spent lubricants—subpart B—PSE.
There shall be no discharge of process wastewater pollutants.
(c) Forging contact cooling water.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium cooled with water |
| Chromium |
0.127 |
0.052 |
| Zinc |
0.422 |
0.177 |
| Ammonia |
38.5 |
17.0 |
| Fluoride |
17.2 |
7.63 |
(d) Forging equipment cleaning wastewater.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium forged |
| Chromium |
0.002 |
0.0007 |
| Zinc |
0.006 |
0.003 |
| Ammonia |
0.532 |
0.234 |
| Fluoride |
0.238 |
0.106 |
(e) Direct chill casting contact cooling water.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium cast with direct chill methods |
| Chromiun |
1.74 |
0.711 |
| Zinc |
5.77 |
2.41 |
| Ammonia |
527 |
232 |
| Fluoride |
235 |
105 |
(f) Surface treatment spent baths.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium surface treated |
| Chromiun |
0.205 |
0.084 |
| Zinc |
0.681 |
0.285 |
| Ammonia |
62.1 |
27.3 |
| Fluoride |
27.8 |
12.3 |
(g) Surface treatment rinse.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium surface treated |
| Chromiun |
0.832 |
0.340 |
| Zinc |
2.76 |
1.16 |
| Ammonia |
252 |
111 |
| Fluoride |
113 |
49.9 |
(h) Sawing or grinding spent emulsions.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium sawed or ground |
| Chromiun |
0.009 |
0.004 |
| Zinc |
0.029 |
0.012 |
| Ammonia |
2.60 |
1.15 |
| Fluoride |
1.16 |
0.515 |
(i) Degreasing Spent Solvents—subpart B—PSES.
There shall be no discharge of process wastewater pollutants.
(j) Wet air pollution control scrubber blowdown.
Subpart B—PSES
|
mg/off-kg (pounds per million off-pounds) of magnesium sanded and repaired or forged |
| Chromium |
0.273 |
0.112 |
| Zinc |
0.904 |
0.378 |
| Ammonia |
8.25 |
36.3 |
| Fluoride |
36.9 |
16.4 |
Code of Federal Regulations
[50 FR 34270, Aug. 23, 1985; 51 FR 2884, Jan. 22, 1986]
