Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations for the process operations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
(a) Rolling spent emulsions.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsions |
| Antimony |
0.068 |
0.030 |
| Lead |
0.010 |
0.005 |
| Oil and grease |
0.468 |
0.281 |
| TSS |
0.960 |
0.457 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(b) Rolling spent soap solutions.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pound) of lead-tin-bismuth rolled with soap solutions |
| Antimony |
0.125 |
0.055 |
| Lead |
0.019 |
0.009 |
| Oil and grease |
0.860 |
0.520 |
| TSS |
1.80 |
0.840 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(c) Drawing spent neat oils—Subpart A—BPT.
There shall be no discharge of process wastewater pollutants.
(d) Drawing spent emulsions.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth drawn with emulsions |
| Antimony |
0.076 |
0.034 |
| Lead |
0.011 |
0.005 |
| Oil and grease |
0.526 |
0.316 |
| TSS |
1.08 |
0.513 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(e) Drawing spent soap solutions.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth drawn with soap solutions |
| Antimony |
0.022 |
0.010 |
| Lead |
0.003 |
0.002 |
| Oil and grease |
0.149 |
0.090 |
| TSS |
0.306 |
0.146 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(f) Extrusion press and solution heat treatment contact cooling water.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds of lead-tin-bismuth heat treated |
| Antimony |
4.14 |
1.850 |
| Lead |
0.605 |
0.288 |
| Oil and grease |
28.80 |
17.30 |
| TSS |
59.10 |
28.10 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(g) Extrusion press hydraulic fluid leakage.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth extruded |
| Antimony |
0.158 |
0.071 |
| Lead |
0.023 |
0.011 |
| Oil and grease |
1.10 |
0.660 |
| TSS |
2.26 |
1.07 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(h) Continuous strip casting contact cooling water.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth cast by the continuous strip method |
| Antimony |
0.003 |
0.001 |
| Lead |
0.0004 |
0.0002 |
| Oil and grease |
0.020 |
0.012 |
| TSS |
0.041 |
0.020 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(i) Semi-continuous ingot casting contact cooling water.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth ingot cast by the sem-continuous method |
| Antimony |
0.085 |
0.038 |
| Lead |
0.013 |
0.006 |
| Oil and grease |
0.588 |
0.353 |
| TSS |
1.21 |
0.574 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(j) Shot casting contact cooling water.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth shot cast |
| Antimony |
0.107 |
0.048 |
| Lead |
0.016 |
0.008 |
| Oil and grease |
0.746 |
0.448 |
| TSS |
1.53 |
0.728 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(k) Shot-forming wet air pollution control scrubber blowdown.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth shot formed |
| Antimony |
1.69 |
0.753 |
| Lead |
0.247 |
0.118 |
| Oil and grease |
11.8 |
7.06 |
| TSS |
24.1 |
11.5 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(l) Alkaline cleaning spent baths.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth alkaline cleaned |
| Antimony |
0.345 |
0.154 |
| Lead |
0.051 |
0.024 |
| Oil and grease |
2.40 |
1.44 |
| TSS |
4.92 |
2.34 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(m) Alkaline cleaning rinse.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth alkaline cleaned |
| Antimony |
6.78 |
3.02 |
| Lead |
0.991 |
0.472 |
| Oil and grease |
47.2 |
28.4 |
| TSS |
96.8 |
46.0 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(n) Swaging spent emulsions.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth swaged with emulsion |
| Antimony |
0.005 |
0.002 |
| Lead |
0.0007 |
0.0004 |
| Oil and grease |
0.036 |
0.022 |
| TSS |
0.073 |
0.034 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(o) Degreasing spent solvents—Subpart A—BPT.
There shall be no discharge of process wastewater pollutants.
Code of Federal Regulations
[50 FR 34270, Aug. 23, 1985; 51 FR 2884, Jan. 22, 1986]
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations for the process operations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
(a) Rolling spent emulsions.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsions |
| Antimony |
0.068 |
0.030 |
| Lead |
0.010 |
0.005 |
| Oil and grease |
0.468 |
0.281 |
| TSS |
0.960 |
0.457 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(b) Rolling spent soap solutions.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pound) of lead-tin-bismuth rolled with soap solutions |
| Antimony |
0.125 |
0.055 |
| Lead |
0.019 |
0.009 |
| Oil and grease |
0.860 |
0.520 |
| TSS |
1.80 |
0.840 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(c) Drawing spent neat oils—Subpart A—BPT.
There shall be no discharge of process wastewater pollutants.
(d) Drawing spent emulsions.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth drawn with emulsions |
| Antimony |
0.076 |
0.034 |
| Lead |
0.011 |
0.005 |
| Oil and grease |
0.526 |
0.316 |
| TSS |
1.08 |
0.513 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(e) Drawing spent soap solutions.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth drawn with soap solutions |
| Antimony |
0.022 |
0.010 |
| Lead |
0.003 |
0.002 |
| Oil and grease |
0.149 |
0.090 |
| TSS |
0.306 |
0.146 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(f) Extrusion press and solution heat treatment contact cooling water.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds of lead-tin-bismuth heat treated |
| Antimony |
4.14 |
1.850 |
| Lead |
0.605 |
0.288 |
| Oil and grease |
28.80 |
17.30 |
| TSS |
59.10 |
28.10 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(g) Extrusion press hydraulic fluid leakage.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth extruded |
| Antimony |
0.158 |
0.071 |
| Lead |
0.023 |
0.011 |
| Oil and grease |
1.10 |
0.660 |
| TSS |
2.26 |
1.07 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(h) Continuous strip casting contact cooling water.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth cast by the continuous strip method |
| Antimony |
0.003 |
0.001 |
| Lead |
0.0004 |
0.0002 |
| Oil and grease |
0.020 |
0.012 |
| TSS |
0.041 |
0.020 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(i) Semi-continuous ingot casting contact cooling water.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth ingot cast by the sem-continuous method |
| Antimony |
0.085 |
0.038 |
| Lead |
0.013 |
0.006 |
| Oil and grease |
0.588 |
0.353 |
| TSS |
1.21 |
0.574 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(j) Shot casting contact cooling water.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth shot cast |
| Antimony |
0.107 |
0.048 |
| Lead |
0.016 |
0.008 |
| Oil and grease |
0.746 |
0.448 |
| TSS |
1.53 |
0.728 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(k) Shot-forming wet air pollution control scrubber blowdown.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth shot formed |
| Antimony |
1.69 |
0.753 |
| Lead |
0.247 |
0.118 |
| Oil and grease |
11.8 |
7.06 |
| TSS |
24.1 |
11.5 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(l) Alkaline cleaning spent baths.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth alkaline cleaned |
| Antimony |
0.345 |
0.154 |
| Lead |
0.051 |
0.024 |
| Oil and grease |
2.40 |
1.44 |
| TSS |
4.92 |
2.34 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(m) Alkaline cleaning rinse.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth alkaline cleaned |
| Antimony |
6.78 |
3.02 |
| Lead |
0.991 |
0.472 |
| Oil and grease |
47.2 |
28.4 |
| TSS |
96.8 |
46.0 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(n) Swaging spent emulsions.
Subpart A—BPT
|
mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth swaged with emulsion |
| Antimony |
0.005 |
0.002 |
| Lead |
0.0007 |
0.0004 |
| Oil and grease |
0.036 |
0.022 |
| TSS |
0.073 |
0.034 |
| pH |
|
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(o) Degreasing spent solvents—subpart A—BPT.
There shall be no discharge of process wastewater pollutants.
Code of Federal Regulations
[50 FR 34270, Aug. 23, 1985; 51 FR 2884, Jan. 22, 1986]
