Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations for the process operations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
(a) Metal powder production atomization wastewater.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of powder wet atomized |
| Copper |
9.58 |
5.04 |
| Cyanide |
1.46 |
0.605 |
| Lead |
2.12 |
1.01 |
| Oil and grease |
101 |
60.5 |
| TSS |
207 |
98.3 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(b) Sizing spent emulsion.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of powder sized |
| Copper |
0.028 |
0.015 |
| Cyanide |
0.004 |
0.002 |
| Lead |
0.006 |
0.003 |
| Oil and grease |
0.292 |
0.175 |
| TSS |
0.599 |
0.285 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(c) Oil-resin impregnation wastewater—Subpart J—BPT.
There shall be no discharge of process wastewater pollutants.
(d) Steam treatment wet air pollution control scrubber blowdown.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of power metallurgy parts steam treated |
| Copper |
1.51 |
0.792 |
| Cyanide |
0.230 |
0.095 |
| Lead |
0.333 |
0.159 |
| Oil and grease |
15.9 |
9.51 |
| TSS |
32.5 |
15.5 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(e) Tumbling, burnishing and cleaning wastewater.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of powder metallurgy parts tumbled, burnished, or cleaned |
| Copper |
8.36 |
4.40 |
| Cyanide |
1.28 |
0.528 |
| Lead |
1.85 |
0.880 |
| Oil and grease |
88.0 |
52.800 |
| TSS |
181 |
85.8 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(f) Sawing or grinding spent neat oils—Subpart J—BPT.
There shall be no discharge of process wastewater pollutants.
(g) Sawing or grinding spent emulsion.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of powder metallurgy parts sawed or ground with emulsion |
| Copper |
0.035 |
0.018 |
| Cyanide |
0.005 |
0.002 |
| Lead |
0.008 |
0.004 |
| Oil and grease |
0.362 |
0.217 |
| TSS |
0.742 |
0.353 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(h) Sawing or grinding contact cooling water.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of powder metallurgy parts sawed or ground with contact cooling |
| Copper |
3.08 |
1.62 |
| Cyanide |
0.470 |
0.195 |
| Lead |
0.681 |
0.324 |
| Oil and grease |
32.4 |
19.5 |
| TSS |
66.4 |
31.6 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(i) Hot pressing contact cooling water.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of powder cooled after pressing |
| Copper |
16.7 |
8.80 |
| Cyanide |
2.55 |
1.06 |
| Lead |
3.70 |
1.76 |
| Oil and grease |
176 |
106 |
| TSS |
361 |
172 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(j) Mixing wet air pollution control scrubber blowdown.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of powder mixed |
| Copper |
15.0 |
7.90 |
| Cyanide |
2.29 |
0.948 |
| Lead |
3.32 |
1.58 |
| Oil and grease |
158 |
94.8 |
| TSS |
324 |
154 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(k) Degreasing spent solvents—Subpart J—BPT.
There shall be no discharge of process wastewater pollutants.
Code of Federal Regulations
[50 FR 34270, Aug. 23, 1985; 51 FR 2889, Jan. 22, 1986]
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations for the process operations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
(a) Metal powder production atomization wastewater.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of powder wet atomized |
| Copper |
9.58 |
5.04 |
| Cyanide |
1.46 |
0.605 |
| Lead |
2.12 |
1.01 |
| Oil and grease |
101 |
60.5 |
| TSS |
207 |
98.3 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(b) Sizing spent emulsion.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of powder sized |
| Copper |
0.028 |
0.015 |
| Cyanide |
0.004 |
0.002 |
| Lead |
0.006 |
0.003 |
| Oil and grease |
0.292 |
0.175 |
| TSS |
0.599 |
0.285 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(c) Oil-resin impregnation wastewater—subpart J—BPT.
There shall be no discharge of process wastewater pollutants.
(d) Steam treatment wet air pollution control scrubber blowdown.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of power metallurgy parts steam treated |
| Copper |
1.51 |
0.792 |
| Cyanide |
0.230 |
0.095 |
| Lead |
0.333 |
0.159 |
| Oil and grease |
15.9 |
9.51 |
| TSS |
32.5 |
15.5 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(e) Tumbling, burnishing and cleaning wastewater.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of powder metallurgy parts tumbled, burnished, or cleaned |
| Copper |
8.36 |
4.40 |
| Cyanide |
1.28 |
0.528 |
| Lead |
1.85 |
0.880 |
| Oil and grease |
88.0 |
52.800 |
| TSS |
181 |
85.8 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(f) Sawing or grinding spent neat oils—subpart J—BPT.
There shall be no discharge of process wastewater pollutants.
(g) Sawing or grinding spent emulsion.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of powder metallurgy parts sawed or ground with emulsion |
| Copper |
0.035 |
0.018 |
| Cyanide |
0.005 |
0.002 |
| Lead |
0.008 |
0.004 |
| Oil and grease |
0.362 |
0.217 |
| TSS |
0.742 |
0.353 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(h) Sawing or grinding contact cooling water.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of powder metallurgy parts sawed or ground with contact cooling |
| Copper |
3.08 |
1.62 |
| Cyanide |
0.470 |
0.195 |
| Lead |
0.681 |
0.324 |
| Oil and grease |
32.4 |
19.5 |
| TSS |
66.4 |
31.6 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(i) Hot pressing contact cooling water.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of powder cooled after pressing |
| Copper |
16.7 |
8.80 |
| Cyanide |
2.55 |
1.06 |
| Lead |
3.70 |
1.76 |
| Oil and grease |
176 |
106 |
| TSS |
361 |
172 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(j) Mixing wet air pollution control scrubber blowdown.
Subpart J—BPT
|
mg/off-kg (pounds per million off-pounds) of powder mixed |
| Copper |
15.0 |
7.90 |
| Cyanide |
2.29 |
0.948 |
| Lead |
3.32 |
1.58 |
| Oil and grease |
158 |
94.8 |
| TSS |
324 |
154 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(k) Degreasing spent solvents—subpart J—BPT.
There shall be no discharge of process wastewater pollutants.
Code of Federal Regulations
[50 FR 34270, Aug. 23, 1985; 51 FR 2889, Jan. 22, 1986]
