Any new source subject to this subpart must achieve the following new source performance standards.
(a)
There shall be no discharge of process wastewater pollutants from metal preparation operations.
(b)
The discharge of process wastewater pollutants from all porcelain enameling coating operations shall not exceed the values set forth below:
Subpart B—NSPS
|
Mg/m2 (pounds per million ft2) of area coated |
Chromium |
0.47 |
(0.10) |
0.19 |
(0.04) |
Lead |
0.13 |
(0.03) |
0.11 |
(0.02) |
Nickel |
0.69 |
(0.14) |
0.47 |
(0.10) |
Zinc |
1.29 |
(0.27) |
0.53 |
(0.11) |
Aluminum |
3.82 |
(0.78) |
1.56 |
(0.32) |
Iron |
1.55 |
(0.32) |
0.79 |
(0.16) |
Oil and grease |
12.60 |
(2.58) |
12.60 |
(2.58) |
TSS |
18.91 |
(3.87) |
15.12 |
(3.10) |
pH |
(1) |
(1) |
(1) |
(1) |
1 Within the range 7.5 to 10.0 at all times. |
Code of Federal Regulations
[47 FR 53184, Nov. 24, 1982, as amended at 50 FR 36544, Sept. 6, 1985]
Any new source subject to this subpart must achieve the following new source performance standards.
(a)
There shall be no discharge of process wastewater pollutants from metal preparation operations.
(b)
The discharge of process wastewater pollutants from all porcelain enameling coating operations shall not exceed the values set forth below:
Subpart B—NSPS
|
Mg/m2 (pounds per million ft2) of area coated |
Chromium |
0.47 |
(0.10) |
0.19 |
(0.04) |
Lead |
0.13 |
(0.03) |
0.11 |
(0.02) |
Nickel |
0.69 |
(0.14) |
0.47 |
(0.10) |
Zinc |
1.29 |
(0.27) |
0.53 |
(0.11) |
Aluminum |
3.82 |
(0.78) |
1.56 |
(0.32) |
Iron |
1.55 |
(0.32) |
0.79 |
(0.16) |
Oil and grease |
12.60 |
(2.58) |
12.60 |
(2.58) |
TSS |
18.91 |
(3.87) |
15.12 |
(3.10) |
pH |
(1) |
(1) |
(1) |
(1) |
1 Within the range 7.5 to 10.0 at all times. |
Code of Federal Regulations
[47 FR 53184, Nov. 24, 1982, as amended at 50 FR 36544, Sept. 6, 1985]