Find Laws Find Lawyers Free Legal Forms USA State Laws
CFR > Title 40 - Protection of Environment > CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY > SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS (Parts 400–471) > PART 466—PORCELAIN ENAMELING POINT SOURCE CATEGORY > 466.02—General definitions.

CFR

466.02—General definitions.

In addition to the definitions set forth in 40 CFR part 401, the following definitions apply to this part:
(a) “Porcelain enameling” means the entire process of applying a fused vitreous enamel coating to a metal basis material. Usually this includes metal preparation and coating operations.
(b) “Basis material” means the metal part or base onto which procelain enamel is applied.
(c) “Area processed” means the total basis material area exposed to processing solutions.
(d) “Area coated” means the area of basis material covered by each coating of enamel.
(e) “Coating operations” means all of the operations associated with preparation and application of the vitreous coating. Usually this includes ballmilling, slip transport, application of slip to the workpieces, cleaning and recovery of faulty parts, and firing (fusing) of the enamel coat.
(f) “Metal preparation” means any and all of the metal processing steps preparatory to applying the enamel slip. Usually this includes cleaning, pickling and applying a nickel flash or chemical coating.
(g) The term “control authority” is defined as the POTW if it has an approved pretreatment program; in the absence of such a program, the NPDES state if it has an approved pretreatment program or EPA if the State does not have an approved program.
(h) The term “precious metal” means gold, silver, or platinum group metals and the principal alloys of those metals.
In addition to the definitions set forth in 40 CFR part 401, the following definitions apply to this part:
(a) “Porcelain enameling” means the entire process of applying a fused vitreous enamel coating to a metal basis material. Usually this includes metal preparation and coating operations.
(b) “Basis material” means the metal part or base onto which procelain enamel is applied.
(c) “Area processed” means the total basis material area exposed to processing solutions.
(d) “Area coated” means the area of basis material covered by each coating of enamel.
(e) “Coating operations” means all of the operations associated with preparation and application of the vitreous coating. Usually this includes ballmilling, slip transport, application of slip to the workpieces, cleaning and recovery of faulty parts, and firing (fusing) of the enamel coat.
(f) “Metal preparation” means any and all of the metal processing steps preparatory to applying the enamel slip. Usually this includes cleaning, pickling and applying a nickel flash or chemical coating.
(g) The term “control authority” is defined as the POTW if it has an approved pretreatment program; in the absence of such a program, the NPDES state if it has an approved pretreatment program or EPA if the State does not have an approved program.
(h) The term “precious metal” means gold, silver, or platinum group metals and the principal alloys of those metals.
Tips