CFR
- Title 1 - General Provisions
- Title 2 - Grants and Agreements
- Title 3 - The President
- Title 4 - Accounts
- Title 5 - Administrative Personnel
- Title 6 - Domestic Security
- Title 7 - Agriculture
- Title 8 - Aliens and Nationality
- Title 9 - Animals and Animal Products
- Title 10 - Energy
- Title 11 - Federal Elections
- Title 12 - Banks and Banking
- Title 13 - Business Credit and Assistance
- Title 14 - Aeronautics and Space
- Title 15 - Commerce and Foreign Trade
- Title 16 - Commercial Practices
- Title 17 - Commodity and Securities Exchanges
- Title 18 - Conservation of Power and Water Resources
- Title 19 - Customs Duties
- Title 20 - Employees' Benefits
- Title 21 - Food and Drugs
- Title 22 - Foreign Relations
- Title 23 - Highways
- Title 24 - Housing and Urban Development
- Title 25 - Indians
- Title 26 - Internal Revenue
- Title 27 - Alcohol, Tobacco Products and Firearms
- Title 28 - Judicial Administration
- Title 29 - Labor
- Title 30 - Mineral Resources
- Title 31 - Money and Finance: Treasury
- Title 32 - National Defense
- Title 33 - Navigation and Navigable Waters
- Title 34 - Education
- Title 35 - Panama Canal
- Title 36 - Parks, Forests, and Public Property
- Title 37 - Patents, Trademarks, and Copyrights
- Title 38 - Pensions, Bonuses, and Veterans' Relief
- Title 39 - Postal Service
- Title 40 - Protection of Environment
- Title 41 - Public Contracts and Property Management
- Title 42 - Public Health
- Title 43 - Public Lands: Interior
- Title 44 - Emergency Management and Assistance
- Title 45 - Public Welfare
- Title 46 - Shipping
- Title 47 - Telecommunication
- Title 48 - Federal Acquisition Regulations System
- Title 49 - Transportation
- Title 50 - Wildlife and Fisheries
464.12—Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available, except that non-continuous dischargers shall not be subject to the maximum day and maximum for monthly average mass (kg/1,000 kkg or lb/million lb of metal poured; kg/62.3 million Sm 3 or lb/billion SCF of air scrubbed) effluent limitations for copper, lead, zinc, total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass limitations and maximum day and maximum for monthly average concentration (mg/l) limitations shall apply. Concentration limitation and annual average mass limitation shall only apply to non-continuous dischargers.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| kg/1,000 kkg (pounds per million pounds) of metal poured | ||
| Copper (T) | 0.0771 | 0.0421 |
| Lead (T) | 0.0791 | 0.039 |
| Zinc (T) | 0.114 | 0.0431 |
| Oil & grease | 3.0 | 1.0 |
| TSS | 3.80 | 1.50 |
| pH | (1) | (1) |
| 1 Within the range of 7.0 to 10.00 at all times. | ||
| Maximum for any 1 day | Maximum for monthly average | Annual average 1 | |
|---|---|---|---|
| (mg/l)2 | (mg/l)2 | ||
| Copper (T) | 0.77 | 0.42 | 0.017 |
| Lead (T) | 0.79 | 0.39 | 0.022 |
| Zinc (T) | 1.14 | 0.43 | 0.027 |
| Oil & grease | 30 | 10 | 0.501 |
| TSS | 38 | 15 | 1.0 |
| pH | (3) | (3) | (3) |
| 1 kg/1,000 kkg (pounds per million pounds) of metal poured. | |||
| 2 These concentrations must be multiplied by the ratio of (12/x) where x is the actual normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for a specific plant. | |||
| 3 Within the range of 7.0 to 10.0 at all times. | |||
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| kg/1,000 kkg (pounds per million pounds) of metal poured | ||
| Copper (T) | 0.0093 | 0.0051 |
| Lead (T) | 0.0096 | 0.0047 |
| Zinc (T) | 0.0138 | 0.0052 |
| Oil & grease | 0.363 | 0.121 |
| TSS | 0.46 | 0.182 |
| pH | (1) | (1) |
| 1 Within the range of 7.0 to 10.0 at all times. | ||
| Maximum for any 1 day | Maximum for monthly average | Annual average 1 | |
|---|---|---|---|
| (mg/l)2 | (mg/l)2 | ||
| Copper (T) | 0.77 | 0.42 | 0.0021 |
| Lead (T) | 0.79 | 0.39 | 0.0027 |
| Zinc (T) | 1.14 | 0.43 | 0.0033 |
| Oil & grease | 30 | 10 | 0.0605 |
| TSS | 38 | 15 | 0.121 |
| pH | (3) | (3) | (3) |
| 1 kg/1,000 kkg (pounds per million pounds) of metal poured. | |||
| 2 These concentrations must be multiplied by the ratio of (1.45/x) where x is the actual normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for a specific plant. | |||
| 3 Within the range of 7.0 to 10.0 at all times. | |||
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| kg/1,000 kkg (pounds per million pounds) of metal poured | ||
| Copper (T) | 0.0066 | 0.0036 |
| Lead (T) | 0.0068 | 0.0034 |
| Zinc (T) | 0.0098 | 0.0037 |
| Total Phenols | 0.0074 | 0.0026 |
| Oil & Grease | 0.259 | 0.0864 |
| TSS | 0.33 | 0.13 |
| pH | (1) | (1) |
| 1 With the range of 7.0 to 10.0 at all times. | ||
| Maximum for any 1 day | Maximum for monthly average | Annual average 1 | |
|---|---|---|---|
| (mg/l) (2) | (mg/l) (2) | ||
| Copper (T) | 0.77 | 0.42 | 0.0015 |
| Lead (T) | 0.79 | 0.39 | 0.0019 |
| Zinc (T) | 1.14 | 0.43 | 0.0023 |
| Total Phenols | 0.86 | 0.3 | 0.0017 |
| Oil & Grease | 30 | 10 | 0.0432 |
| TSS | 38 | 15 | 0.0864 |
| pH | (3) | (3) | (3) |
| 1 kg/1,000 kkg (pounds per million pounds) of metal poured. | |||
| 2 These concentrations must be multiplied by the ratio of (1.04/x) where x is the actual normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for a specific plant. | |||
| 3 Within the range of 7.0 to 10.0 at all times, | |||
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| kg/62.3 million Sm3 (pounds per billion SCF) of air scrubbed | ||
| Copper (T) | 0.231 | 0.126 |
| Lead (T) | 0.237 | 0.117 |
| Zinc (T) | 0.343 | 0.129 |
| Total Phenols | 0.258 | 0.09 |
| Oil & Grease | 9.01 | 3.0 |
| TSS | 11.4 | 4.51 |
| pH | (1) | (1) |
| 1 Within the range of 7.0 to 10.0 at all times. | ||
| Maximum for any 1 day | Maximum for monthly average | Annual average 1 | |
|---|---|---|---|
| (mg/l)2 | mg/l)2 | ||
| Copper (T) | 0.77 | 0.42 | 0.0511 |
| Lead (T) | 0.79 | 0.39 | 0.0661 |
| Zinc (T) | 1.14 | 0.43 | 0.0811 |
| Total Phenols | 0.86 | 0.3 | 0.0601 |
| Oil & Grease | 30 | 10 | 1.5 |
| TSS | 38 | 15 | 3.0 |
| pH | (3) | (3) | (3) |
| 1 kg/62.3 million SM3 (pounds per billion SCF) of air scrubbed. | |||
| 2 These concentrations must be multiplied by the ratio of (0.036/x) where x is the actual normalized process waste-water flow (in gallons per 1,000 SCF of air scrubbed) for a specific plant. | |||
| 3 Within the range of 7.0 to 10.0 at all times. | |||
(e) Grinding Scrubber Operations.
No discharge of process wastewater pollutants to navigable waters.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| kg/1,000 kkg (pounds per million pounds) of metal poured | ||
| Copper (T) | 8.48 | 4.63 |
| Lead (T) | 8.7 | 4.3 |
| Zinc (T) | 12.6 | 4.74 |
| Oil and grease | 330 | 110 |
| TSS | 419 | 165 |
| pH | (1) | (1) |
| 1 Within the range of 7.0 to 10.0 at all times. | ||
| Maximum for any 1 day | Maximum for monthly average | Annual average 1 | |
|---|---|---|---|
| (mg/l)2 | (mg/l)2 | ||
| Copper (T) | 0.77 | 0.42 | 1.87 |
| Lead (T) | 0.79 | 0.39 | 2.42 |
| Zinc (T) | 1.14 | 0.43 | 2.97 |
| Oil and grease | 30 | 10 | 55.1 |
| TSS | 38 | 15 | 110 |
| pH | (3) | (3) | (3) |
| 1 kg/1,000 kkg (pounds per million pounds) of metal poured. | |||
| 2 These concentrations must be multiplied by the ratio of (1,320/x) where x is the actual normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for a specific plant. | |||
| 3 Within the range of 7.0 to 10.0 at all times. | |||
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| kg/62.3 million Sm3 (pounds per billion SCF) of air scrubbed | ||
| Copper (T) | 3.01 | 1.64 |
| Lead (T) | 3.09 | 1.52 |
| Zinc (T) | 4.45 | 1.68 |
| Total phenols | 3.36 | 1.17 |
| Oil and grease | 117 | 39.1 |
| TSS | 148 | 58.6 |
| pH | (1) | (1) |
| 1 Within the range of 7.0 to 10.0 at all times. | ||
| Maximum for any 1 day | Maximum for monthly average | Annual average 1 | |
|---|---|---|---|
| (mg/l) 2 | (mg/l) 2 | ||
| Copper (T) | 0.77 | 0.42 | 0.664 |
| Lead (T) | 0.79 | 0.39 | 0.859 |
| Zinc (T) | 1.14 | 0.43 | 1.05 |
| Total phenols | 0.86 | 0.3 | 0.781 |
| Oil and grease | 30 | 10 | 19.5 |
| TSS | 38 | 15 | 39.1 |
| pH | (2) | (3) | (3) |
| 1 kg/62.3 million Sm3 (pounds per billion SCF) of air scrubbed. | |||
|
2 These concentrations must be multiplied by the ratio of (0.468/x) where x is the acutal normalized process wastewater flow (in gallons per 1,000 SCF of air scrubbed) for a specific plant.
Code of Federal Regulations
559
|
|||
| 3 Within the range of 7.0 to 10.0 at all times. | |||
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| kg/1,000 kkg (pounds per million pounds) of metal poured | ||
| Copper (T) | 0.297 | 0.162 |
| Lead (T) | 0.305 | 0.151 |
| Zinc (T) | 0.44 | 0.166 |
| Oil and grease | 11.6 | 3.86 |
| TSS | 14.7 | 5.79 |
| pH | (1) | (1) |
| 1 Within the range of 7.0 to 10.0 at all times. | ||
| Maximum for any 1 day | Maximum for monthly average | Annual average 1 | |
|---|---|---|---|
| (mg/l) 1 | (mg/) 1 | ||
| Copper (T) | 0.77 | 0.42 | 0.0656 |
| Lead (T) | 0.79 | 0.39 | 0.0849 |
| Zinc (T) | 1.14 | 0.43 | 0.104 |
| Oil and grease | 30 | 10 | 1.93 |
| TSS | 38 | 15 | 3.86 |
| pH | (3) | (3) | (3) |
| 1 kg/1,000 kkg (pounds per million pounds) of metal | |||
| 2 These concentrations must be multiplied by the ratio of (46.3/x) where x is the actual normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for a specific plant. | |||
| 3 Within the range of 7.0 to 10.0 at all times. | |||
Code of Federal Regulations
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available, except that non-continuous dischargers shall not be subject to the maximum day and maximum for monthly average mass (kg/1,000 kkg or lb/million lb of metal poured; kg/62.3 million Sm 3 or lb/billion SCF of air scrubbed) effluent limitations for copper, lead, zinc, total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass limitations and maximum day and maximum for monthly average concentration (mg/l) limitations shall apply. Concentration limitation and annual average mass limitation shall only apply to non-continuous dischargers.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| kg/1,000 kkg (pounds per million pounds) of metal poured | ||
| Copper (T) | 0.0771 | 0.0421 |
| Lead (T) | 0.0791 | 0.039 |
| Zinc (T) | 0.114 | 0.0431 |
| Oil & grease | 3.0 | 1.0 |
| TSS | 3.80 | 1.50 |
| pH | (1) | (1) |
| 1 Within the range of 7.0 to 10.00 at all times. | ||
| Maximum for any 1 day | Maximum for monthly average | Annual average 1 | |
|---|---|---|---|
| (mg/l)2 | (mg/l)2 | ||
| Copper (T) | 0.77 | 0.42 | 0.017 |
| Lead (T) | 0.79 | 0.39 | 0.022 |
| Zinc (T) | 1.14 | 0.43 | 0.027 |
| Oil & grease | 30 | 10 | 0.501 |
| TSS | 38 | 15 | 1.0 |
| pH | (3) | (3) | (3) |
| 1 kg/1,000 kkg (pounds per million pounds) of metal poured. | |||
| 2 These concentrations must be multiplied by the ratio of (12/x) where x is the actual normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for a specific plant. | |||
| 3 Within the range of 7.0 to 10.0 at all times. | |||
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| kg/1,000 kkg (pounds per million pounds) of metal poured | ||
| Copper (T) | 0.0093 | 0.0051 |
| Lead (T) | 0.0096 | 0.0047 |
| Zinc (T) | 0.0138 | 0.0052 |
| Oil & grease | 0.363 | 0.121 |
| TSS | 0.46 | 0.182 |
| pH | (1) | (1) |
| 1 Within the range of 7.0 to 10.0 at all times. | ||
| Maximum for any 1 day | Maximum for monthly average | Annual average 1 | |
|---|---|---|---|
| (mg/l)2 | (mg/l)2 | ||
| Copper (T) | 0.77 | 0.42 | 0.0021 |
| Lead (T) | 0.79 | 0.39 | 0.0027 |
| Zinc (T) | 1.14 | 0.43 | 0.0033 |
| Oil & grease | 30 | 10 | 0.0605 |
| TSS | 38 | 15 | 0.121 |
| pH | (3) | (3) | (3) |
| 1 kg/1,000 kkg (pounds per million pounds) of metal poured. | |||
| 2 These concentrations must be multiplied by the ratio of (1.45/x) where x is the actual normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for a specific plant. | |||
| 3 Within the range of 7.0 to 10.0 at all times. | |||
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| kg/1,000 kkg (pounds per million pounds) of metal poured | ||
| Copper (T) | 0.0066 | 0.0036 |
| Lead (T) | 0.0068 | 0.0034 |
| Zinc (T) | 0.0098 | 0.0037 |
| Total Phenols | 0.0074 | 0.0026 |
| Oil & Grease | 0.259 | 0.0864 |
| TSS | 0.33 | 0.13 |
| pH | (1) | (1) |
| 1 With the range of 7.0 to 10.0 at all times. | ||
| Maximum for any 1 day | Maximum for monthly average | Annual average 1 | |
|---|---|---|---|
| (mg/l) (2) | (mg/l) (2) | ||
| Copper (T) | 0.77 | 0.42 | 0.0015 |
| Lead (T) | 0.79 | 0.39 | 0.0019 |
| Zinc (T) | 1.14 | 0.43 | 0.0023 |
| Total Phenols | 0.86 | 0.3 | 0.0017 |
| Oil & Grease | 30 | 10 | 0.0432 |
| TSS | 38 | 15 | 0.0864 |
| pH | (3) | (3) | (3) |
| 1 kg/1,000 kkg (pounds per million pounds) of metal poured. | |||
| 2 These concentrations must be multiplied by the ratio of (1.04/x) where x is the actual normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for a specific plant. | |||
| 3 Within the range of 7.0 to 10.0 at all times, | |||
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| kg/62.3 million Sm3 (pounds per billion SCF) of air scrubbed | ||
| Copper (T) | 0.231 | 0.126 |
| Lead (T) | 0.237 | 0.117 |
| Zinc (T) | 0.343 | 0.129 |
| Total Phenols | 0.258 | 0.09 |
| Oil & Grease | 9.01 | 3.0 |
| TSS | 11.4 | 4.51 |
| pH | (1) | (1) |
| 1 Within the range of 7.0 to 10.0 at all times. | ||
| Maximum for any 1 day | Maximum for monthly average | Annual average 1 | |
|---|---|---|---|
| (mg/l)2 | mg/l)2 | ||
| Copper (T) | 0.77 | 0.42 | 0.0511 |
| Lead (T) | 0.79 | 0.39 | 0.0661 |
| Zinc (T) | 1.14 | 0.43 | 0.0811 |
| Total Phenols | 0.86 | 0.3 | 0.0601 |
| Oil & Grease | 30 | 10 | 1.5 |
| TSS | 38 | 15 | 3.0 |
| pH | (3) | (3) | (3) |
| 1 kg/62.3 million SM3 (pounds per billion SCF) of air scrubbed. | |||
| 2 These concentrations must be multiplied by the ratio of (0.036/x) where x is the actual normalized process waste-water flow (in gallons per 1,000 SCF of air scrubbed) for a specific plant. | |||
| 3 Within the range of 7.0 to 10.0 at all times. | |||
(e) Grinding Scrubber Operations.
No discharge of process wastewater pollutants to navigable waters.
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
|---|---|---|
| kg/1,000 kkg (pounds per million pounds) of metal poured | ||
| Copper (T) | 8.48 | 4.63 |
| Lead (T) | 8.7 | 4.3 |
| Zinc (T) | 12.6 | 4.74 |
| Oil and grease | 330 | 110 |
| TSS | 419 | 165 |
| pH | (1) | (1) |
| 1 Within the range of 7.0 to 10.0 at all times. | ||
| Maximum for any 1 day | Maximum for monthly average | Annual average 1 | |
|---|---|---|---|
| (mg/l)2 | (mg/l)2 | ||
| Copper (T) | 0.77 | 0.42 | 1.87 |
| Lead (T) | 0.79 | 0.39 | 2.42 |
| Zinc (T) | 1.14 | 0.43 | 2.97 |
| Oil and grease | 30 | 10 | 55.1 |
| TSS | 38 | 15 | 110 |
| pH | (3) | (3) | (3) |
| 1 kg/1,000 kkg (pounds per million pounds) of metal poured. | |||
| 2 These concentrations must be multiplied by the ratio of (1,320/x) where x is the actual normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for a specific plant. | |||
| 3 Within the range of 7.0 to 10.0 at all times. | |||
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly avera
Tips
|
|---|