Find Laws Find Lawyers Free Legal Forms USA State Laws
CFR > Title 40 - Protection of Environment > CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY > SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS (Parts 400–471) > PART 428—RUBBER MANUFACTURING POINT SOURCE CATEGORY > SUBPART G—Large-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory (§428.70 to §428.76) > 428.76—Pretreatment standards for new sources.

CFR

428.76—Pretreatment standards for new sources.

Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403, in addition to the limitations set forth in paragraphs (a) and (b) of this section.
(a) The following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart:
Pollutant or pollutant property Pretreatment standard
pH No limitation.
TSS Do.
Oil and grease 100 mg/l daily maximum.
(b) The following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section, and attributable to lead-sheathed hose production, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart, in addition to the limitations set forth by § 428.76(a) :
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—
Metric units (kg/kkg of raw material)
Lead 0.0017 0.0007
English units (lb/1,000 lb of raw material)
Lead 0.0017 0.0007

Code of Federal Regulations

[40 FR 2340, Jan. 10, 1975, as amended at 60 FR 33963, June 29, 1995]
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403, in addition to the limitations set forth in paragraphs (a) and (b) of this section.
(a) The following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart:
Pollutant or pollutant property Pretreatment standard
pH No limitation.
TSS Do.
Oil and grease 100 mg/l daily maximum.
(b) The following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section, and attributable to lead-sheathed hose production, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart, in addition to the limitations set forth by § 428.76(a) :
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—
Metric units (kg/kkg of raw material)
Lead 0.0017 0.0007
English units (lb/1,000 lb of raw material)
Lead 0.0017 0.0007

Code of Federal Regulations

[40 FR 2340, Jan. 10, 1975, as amended at 60 FR 33963, June 29, 1995]
Tips