Table 150.380(a)—Regulated Activities of Vessels at Deepwater Ports
Tankers calling at port |
C |
C |
C |
C |
Support vessel movements |
C |
C |
C |
C |
Transit by vessels other than tankers or support vessels |
F |
D |
P |
P |
Mooring to surface components (for example an SPM) by vessels other than tankers or support vessels |
N |
N |
N |
N |
Anchoring by vessels other than tankers or support vessels |
N |
F |
C |
F |
Fishing, including bottom trawl (shrimping) |
N |
D |
P |
N |
Mobile drilling operations or erection of structures. 2
|
N |
R |
N |
N |
Lightering/transshipment |
N |
N |
N |
N |
1 Areas to be avoided are in subpart J of this part. |
2 Not part of Port Installation. |
Key to regulated activities for Table 150.380(a):
|
C—Movement of the vessel is permitted when cleared by the person in charge of vessel operations. |
D—Movement is not restricted, but recommended transit speed not to exceed 10 knots. Communication with the person in charge of vessel operations. |
F—Only in an emergency. Anchoring will be avoided in a no anchoring area except in the case of immediate danger to the ship or persons on board. |
N—Not permitted. |
P—Transit is permitted when the vessel is not in the immediate area of a tanker, and when cleared by the vessel traffic supervisor. |
R—Permitted only if determined that operation does not create unacceptable risk to personnel safety and security and operation. For transiting foreign-flag vessels, the requirement for clearance to enter the area to be avoided and no anchoring area is advisory in nature, but mandatory for an anchorage area established within 12 nautical miles. |