Find Laws Find Lawyers Free Legal Forms USA State Laws
CFR > Title 30 - Mineral Resources > CHAPTER I—MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR > SUBCHAPTER K—METAL AND NONMETAL MINE SAFETY AND HEALTH (parts 56 to 58) > PART 56—SAFETY AND HEALTH STANDARDS—SURFACE METAL AND NONMETAL MINES > SUBPART M—Machinery and Equipment (§56.14000 to §56.14219) > 56.14211—Blocking equipment in a raised position.

CFR

56.14211—Blocking equipment in a raised position.

(a) Persons shall not work on top of, under, or work from mobile equipment in a raised position until the equipment has been blocked or mechanically secured to prevent it from rolling or falling accidentally.
(b) Persons shall not work on top of, under, or work from a raised component of mobile equipment until the component has been blocked or mechanically secured to prevent accidental lowering. The equipment must also be blocked or secured to prevent rolling.
(c) A raised component must be secured to prevent accidental lowering when persons are working on or around mobile equipment and are exposed to the hazard of accidental lowering of the component.
(d) Under this section, a raised component of mobile equipment is considered to be blocked or mechanically secured if provided with a functional load-locking device or a device which prevents free and uncontrolled descent.
(e) Blocking or mechanical securing of the raised component is required during repair or maintenance of elevated mobile work platforms.
Tips