Any performance standard established under this part will include such provisions as the Food and Drug Administration determines are necessary to provide reasonable assurance of the safety and effectiveness of the device or devices for which it is established. Where necessary to provide such assurance, a standard will address (but need not be limited to):
(a)
Performance characteristics of the device;
(b)
The design, construction, components, ingredients, and properties of the device, and its compatibility with power systems and connections to such systems;
(c)
The manufacturing processes and quality control procedures applicable to the device;
(d)
Testing of the device on either a sample or a 100-percent basis by the manufacturer, or, if it is determined that no other more practical means are available to the Food and Drug Administration to assure the conformity of the device to the standard, providing for testing by the Food and Drug Administration or a third person to ensure that the device conforms to the standard;
(e)
The publication of the results of each test or of certain tests of the device to show that the device conforms to the portions of the standard for which the test or tests were required;
(f)
Manufacturers' certification to purchasers or to the Food and Drug Administration that the device conforms to the applicable performance standard;
(g)
Restrictions on the sale and distribution of the device, but only to the extent authorized under section 520(e) of the act;
(h)
The use, and the form and content, of labeling for the proper installation, maintenance, operation, and use of the device. Among the provisions that may be required in the labeling are warnings; storage and transportation information; expiration dates; the date and place of manufacture; the results that may be expected if the device is used properly; the ranges of accuracy of diagnostic information; instructions regarding the proper care of, and the proper components, accessories, or other equipment to be used with the device; and statements concerning the appropriate patient population, for example, a statement that the device is considered safe and effective only when used by, or in the treatment of, a patient who has been tested by particular designated procedures and found to have an illness or condition for which use of the device is indicated by a person skilled in the use of the device.